AOI circuit board,Automotive lighting PCB,Electronic assembly PCB,Socket terminal PCB-Shenzhen Weienchen Technology Co., Ltd.

Tel: +86-755-29662580

Email: sales@victoriapcb.com

current position: Home  》  News  》  Industry News

Reasons for the circuit board not getting power

source:Industry News release time:2022-08-17 Article author:yu Popular:pcb

  Reasons for the circuit board not getting power(图1)

  1. The circuit board is not energized, it may be that the components in the circuit board are soldered or unsoldered, resulting in no electricity.

  2. For the situation that the circuit board is not energized, there may be a problem with the resistance of the circuit board, or a problem with some other components that causes this to happen.

  How to detect if the circuit board is not powered on

  The solution to the circuit board is not powered on: In the case that the circuit board is not powered on, we can first use a multimeter to check the circuit in the circuit board to see if the circuit is disconnected, and then continue to test. When replacing the circuit board, do not directly replace the good circuit board. Before replacing the circuit board, it is necessary to determine whether there is a short circuit in the circuit board test panel. If there is a short circuit, it cannot be replaced directly, otherwise the replaced circuit board will be burned out immediately.


Read recommendations:

Six-layer Immersion Gold Board (BGA)

High frequency PCB

DIP plugin

Six-layer Immersion Gold Board (BGA)

Printed circuit board warpage leveling method.Electronic Manufacturing Services PCB

Previous:Quality control of PCB circuit board processing stage.Industrial Electronics PCB Wholesale Back to list Next:Origin and development of printed circuit boards

Online message

Popular recommended products

Related Information

what is pcb

2022-09-30

Where is the quality assurance of chip processing factories in PCBA processing and production?

2022-09-30

What aspects should a good PCB circuit board manufacturer identify?

2022-09-28

Analysis of Deformation Causes of Circuit Boards in PCBA Processing in Chip Processing Plants

2022-09-27

SMT PCBA processing factory SMT process workshop placement machine processing production standards

2022-09-26

What role does proofing play in the production process of the chip factory during pcba processing?

2022-09-24

What problems are prone to occur in the design of circuit board pcb proofing?

2022-09-23

PCB application

2022-09-22

Simple classification of PCBs

2022-09-22

How to make up for car PCB circuit board defects

2022-09-21

How pcb board manufacturers control the accuracy of pcb copy board

2022-09-21

What factors need to be considered in the production of multi-layer circuit boards

2022-09-20

What is the difference between wave soldering and manual soldering in PCBA processing by smt chip fa

2022-09-20

How to quote for PCB board?Automotive lighting PCB

2022-09-19

How to deal with the BGA on the PCBA circuit board that needs to be repaired and disassembled?

2022-09-19

What factors should be paid attention to in PCB circuit board design

2022-09-17

Some small principles of PCB copying process

2022-09-17

Common problems and solutions of copper plating technology in PCB circuit board process

2022-09-16

printed circuit board

2022-09-15

The distinction and pros and cons of circuit boards

2022-09-14

PCB circuit board copper cladding should pay attention to those problems

2022-09-14

What should be paid attention to before circuit board proofing manufacturers.One-stop contract PCB

2022-09-13

Printed circuit board knowledge to know when purchasing.Electrolytic capacitor PCB

2022-09-13

Blind hole board production knowledge in Shenzhen circuit board factory

2022-09-07

How to choose the right PCB factory when proofing the circuit board

2022-09-07

Circuit board factory: analysis of current and voltage feedback judgment points.X-ray inspection PCB

2022-09-06

Detailed explanation of horizontal electroplating line process for high-precision multi-layer circui

2022-09-06

How to Improve Etching Process Quality Analysis

2022-09-05

The whole process of manual PCB patch production that PCB whites must know

2022-09-05

Common problems and solutions in PCBA processing

2022-09-01